Canon LBP3010 Series, Руководство по обслуживанию, Страница: 35 / 146

Chapter 2
2-3
5) Initial drive for main motor
6) Initial drive for fixing heater
Controlling fixing temperature targeting for 120 deg C.
7) Initial drive of the scanner motor.
8) High-voltage control
Detect cartridge presence after primary charging AC bias is applied.
Cleaning transfer roller.
9) Failure/Abnormality check
Detecting fixing unit failure and door open during above periods.
2.3 LASER EXPOSURE SYSTEM
2.3.1 Overview/Configuration
2.3.1.1 Overview
0019-3460
LBP3100 / LBP3010B
The laser Exposure system forms static latent images on the photosensitive drum according to the VIDEO signals sent from the main controller, and is comprised
of the laser driver and scanner motor, etc. There are controlled by the engine controller. The following is the outline of the laser Exposure system.
F-2-3
The operational sequence of the laser scanner unit is described below.
1) When the Main controller sends print instruction command, the Engine controller rotates the Four-faced mirror, causing the Scanner motor to rotate.
2) When the Scanner motor starts to rotate, the Engine controller emits the laser forcibly using the Laser control signal, causing the Engine controller to start rotation
control for the Scanner motor.
3) The Engine controller controls to keep a constant speed of rotation of the Scanner motor using the Scanner motor speed control signal.
4) After the rotation speed of the Scanner motor reaches its target, the Main controller sends VIDEO signals to the Laser driver PCB.
5) The Laser driver emits laser diode according to these signals.
6) The laser beam passes through the collimator lens and the cylindrical lens and enters the Four-faced mirror rotating at a constant speed.
7) The laser beam reflected by the Four-faced mirror is focused on the Photosensitive drum via the image-forming lens at the front of the Four-faced mirror.
Laser unit
Scanner motor unit
Four-faced mirror
Syndrical lens
Photosensitive drum
Engine Controller
BD INPUT signal VIDEO signal LASER CONTROL signal SCANNER MOTOR SPEED CONTROL signal
Main controller
Forcus lens
BD sensor
Collimator
lens