manualshive.com logo in svg

Canon LBP3010 Series, Руководство по обслуживанию, Страница: 27 / 146

Поделиться
Скачать
Canon LBP3010 Series Скачать руководство пользователя страница 27

Chapter 1

1-11

Toner on Clothing or Skin
1.Remove toner from clothing or skin, and wash with water.
2.Do not use warm or hot water, which will cause the toner to turn jelly-like and fuse permanently with the fibers of clothing.
3.Toner tends to react readily with vinyl. Do not bring it in contact.

Be sure to avoid using a transparent case made from vinyl chloride.
If it is in contact with a copy surface, the toner on it may melt, causing the case and the paper to stick to each other.

1.5.9 Handling the Laser Unit

0025-1133

LBP6000 / LBP6000B

The laser/scanner unit emits invisible laser beam. DO NOT disassemble the unit as the laser beam can possibly damage your eyes. The unit cannot be adjusted in
the field. The following label is attached to the cover of the unit:

F-1-12

F-1-13

1.5.10 Points to Note at Disassembly/Assembly Work

0025-1134

LBP6000 / LBP6000B

Be sure to ensure the following notes when performing disassembly/assembly work.
1. Be sure to disconnect the power plug for safety when performing disassembly/assembly work.
2. As for assembly procedure, perform the reverse procedure of disassembly unless otherwise instructed.
3. Avoid making mistakes in the type of screws (length/diameter) and usage locations for assembly.
4. Screws w/washer are used as mounting screws for grounding wires and varistors with the aim of checking electric continuity. Be sure to use this screw for as-

sembly.

5. Basically, do not activate the machine with their parts being removed.
6. Do not remove paintlock screws at the time of disassembly.

Содержание LBP3010 Series



















































































































































Отзывы:

Нет отзывов