manualshive.com logo in svg

Canon LBP3010 Series, Руководство по обслуживанию, Страница: 24 / 146

Поделиться
Скачать
Canon LBP3010 Series Скачать руководство пользователя страница 24

Chapter 1  

1-8

1.4 Using the Machine

1.4.1 Control Panel

0019-5284

LBP3100 / LBP3010B

F-1-6

[1] Power lamp (green)
Lighting:
Indicates that the power of the host machine is turned on.
Not lighting:
Indicates that the power of the host machine is not turned on.

[2] Paper lamp/paper key (red)
<Lamp>
Flashing:
Indicates that there is no paper in the pickup source and print cannot be executed, or papers cannot be fed correctly.
Not lighting:
Indicates that the machine can make prints.

<Key>
Pressing this key after executing pickup of paper or jam removal restarts printing.

1.4.2 Control Panel

0025-1124

LBP6000 / LBP6000B

F-1-7

[1] Power lamp (green)

Lighting:
Indicates that the power of the host machine is turned on.
Not lighting:
Indicates that the power of the host machine is not turned on.

[2] Paper lamp/paper key (red)

<Lamp>
Flashing:
Indicates that there is no paper in the pickup source and print cannot be executed, or papers cannot be fed correctly.
Not lighting:
Indicates that the machine can make prints.

<Key>
Pressing this key after executing pickup of paper or jam removal restarts printing.

1.5 Safety

1.5.1 Safety of Laser Light

0019-1859

LBP3100 / LBP3010B

Laser light can be extremely hazardous to the human body.

[2]

[1]

(1)

(2)

Содержание LBP3010 Series



















































































































































Отзывы:

Нет отзывов