Canon Laser Shot LBP-5100, Руководство по обслуживанию

Страница: 130 / 162

Chapter 4
4-4
F-4-7
2. Press a button of 'Advanced Setting' on the screen of 'Finishing detail'
3. Change 'Special print Mode'.
4.5.2 List Of Special Print Mode
0011-4037
LBP5000
T-4-1
4.5.3 Outline
0015-9309
LBP5100
Problem Setting in Printer driver Cause and Remedy
A printer is installed under high-humidity
environment and the print density becomes lighter.
Special setting 1
When using the printer under high-humidity environment or depending on
the media used, the image of color letters or patterns with toners of two
colors or more may become lighter. In that case, if setting to "Special
setting 1", the print image may be able to be improved.
An envelope flap is sealed.
Special setting 2
When using the printer under high-humidity environment or depending on
the envelope types, the envelop flap may be sealed. In that case, if setting
to "Special setting 2", the problem may be able to be improved.
A printer is installed under high-humidity
environment and the print density of halftone
becomes lighter or the displacement of letters occurs.
Special setting 3
When using the printer under high-humidity environment or depending on
the media used, the print density of thin line or fine halftone may become
lighter. In that case, if setting to "Special setting 3", the print image may be
able to be improved.
A printer is installed under low-humidity
environment and the copy image fault occurs in
paper with a high value of resistance.
Special setting 4
When using the printer under low-humidity environment or depending on
the media types, the marks like toner scatter around characters or patterns
may be printed. In that case, if setting to "Special setting 4", the print
image may be able to be improved.
The media with a rough texture is used.
Special setting 5
When using the media with a rough texture, the density of image,
especially the one with toners of two or more colors, may become lighter.
In that case, if setting to "Special setting 5", the print image may be able to
be improved.
Minus curling occurs.
Special setting 6
When using the printer under high-humidity or depending on the media
types, the printed sheet may curl to the non-printed side in some print
patterns (especially the pattern with the low print ratio). In that case, if
setting to "Special setting 6", the curling may be able to be improved.
Plus curling occurs.
Special setting 7
When using the printer under low-humidity or depending on the media
types, the printed sheet may curl to the printed side in some print patterns
(especially the pattern with the high print ratio). In that case, if setting to
"Special setting 7", the curling may be able to be improved.
The reproducibility in halftone decreases.
Special setting 8
When not using the printer for a long period, the reproducibility in halftone
may decrease or the inconsistencies in density may occur. In that case, if
setting to "Special setting 8", the problem may be improved. In this mode,
however, the lead time for printing becomes a bit longer.
Fogging occurs in the whole image.
Special setting 9
When printing the image with a large blank area on the gloss paper, in
some rare cases, the fogging may occur in the blank area. In that case, if
setting to "Special setting 9", the problem may be improved.
The edge enhancement occurs.
Special setting 10
When printing the image with a high-density area, the edge enhancement
may occur in the area because the trailing edge of the area may be
reproduced in high density. In that case, if setting to "Special setting 10",
the edge enhancement may be improved.