Canon LASER SHOT LBP-3600, Руководство пользователя

Страница: 430 / 459

Paper Problems
7-47
T
roub
leshooting
7
Paper Problems
Paper comes out wrinkled.
Cause 1 Paper is not loaded in the paper cassette properly.
Remedy Load paper in the paper cassette properly. (See "Printing from a Paper
Cassette," on p. 2-17)
Cause 2 Paper is loaded in the multi-purpose tray at an angle.
Remedy Load the paper in the multi-purpose tray straight. (See "Printing from the
Multi-purpose Tray," on p. 2-57)
Cause 3 Paper is damp.
Remedy Replace paper with paper from a new stack.
Paper curls.
Cause 1 Paper is inappropriate.
Remedy Replace the paper with a type that can be used with this printer. (See "Paper
Requirements," on p. 2-2)
Cause 2 The Paper Type setting does not match the loaded paper.
Remedy Select [Plain Paper L] for [Paper Type] in the printer driver.
In order to specify the setting for [Paper Type], open the [Paper Source] sheet.
White dust is attached to the printed transparencies.
Cause The transparencies were printed just after another type of paper was printed
continuously.
Remedy If you print continuously on another type of paper before printing on
transparencies, the transparencies may come out with chipped paper attached.
In this case, wipe and remove the chipped paper with a soft cloth.
Paper jams occur when performing automatic 2-sided printing.
Cause 1 Paper is damp.
Remedy Replace the paper with paper from a new stack and print again.