manualshive.com logo in svg

Canon Laser Shot LBP-1310, Руководство пользователя

Поделиться
Скачать
Canon Laser Shot LBP-1310 Скачать руководство пользователя страница 4

 

3

 

If no errors are found, the 

オンライン

  indicator, the 

印刷可

  indicator and the 

selected paper feed indicator light up, and the message 

<00 インサツ カノウ >

 

appears on the display when the printer is ready to print.

The information shown on the display is as follows:

 

Turning Off the Printer

 

The printer should be turned off as described in the following procedure.

IMPORTANT

 

•

 

If the printer is connected to a network, make sure that the printer is not printing data 
from another personal computer before turning off the power.

 

•

 

If the power is turned off while the 

ジョブ

  indicator is on, any print data remaining in the 

memory of the printer is erased. Press

［排出］

 

 while offline to output any important print 

data, or wait until printing is complete, before turning off the power. (See “Canceling 
Printing,” on P. 58)

 

•

 

Do not turn off the power to the printer while it is printing.

 

•

 

Do not turn off the power to the printer during the self-diagnostic test performed 
immediately after the power has been turned on.

 

•

 

If the message that the NVRAM is initializing or writing data is displayed, make sure that 
the message has been canceled before turning off the power.

 

•

 

If the message that the Flash Memory is initializing or deleting data is displayed, make 
sure that the message has been canceled before turning off the power.

オンライン 

排出 

リセット／

実行 

動作モード 

セットアップ 

ユーティリティ 

ジョブキャンセル 

給紙選択 

メッセージ 

ジョブ 

印刷可 

00  ｲ ﾝ ｻ ﾂ   ｶ ﾉ ｳ       A4

00  ｲ ﾝ ｻ ﾂ   ｶ ﾉ ｳ       A4

Ready to print and no 
data is being 
processed for printing.

Currently selected 
paper feed size.

Содержание Laser Shot LBP-1310




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды