manualshive.com logo in svg

Canon Laser Class 810, Основное руководство по эксплуатации

Поделиться
Скачать
Canon Laser Class 810 Скачать руководство пользователя страница 36

What Can I Do w

th Th

s Mach

ne?

xxxv

Laser Safety

Ths machne comples wth 21 CFR Chapter 1 Subchapter J as a Class 1 laser product 
under the U.S. Department of Health and Human Servces (DHHS) Radaton Performance 
Standard accordng to the Radaton Control for Health and Safety Act of 1968. Ths means 
that the machne does not produce hazardous radaton.
Snce radaton emtted nsde the machne s completely confned wthn protectve 
housngs and external covers, the laser beam cannot escape from the machne durng any 
phase of user operaton.

CDRH Regulations

The Center for Devces and Radologcal Health (CDRH) of the U.S. Food and Drug 
Admnstraton mplemented regulatons for laser products on August 2, 1976. These 
regulatons apply to laser products manufactured from August 1, 1976. Complance s 
mandatory for products marketed n the Unted States.

Use of controls, adjustments, or performance of procedures other than those specfed n ths manual may result 
n hazardous radaton exposure.

The label s attached to the laser scanner machne nsde the machne and s not n a user 
access area.

Содержание Laser Class 810





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды