manualshive.com logo in svg

Canon Laser Class 810, Основное руководство по эксплуатации

Поделиться
Скачать
Canon Laser Class 810 Скачать руководство пользователя страница 330

Troubleshoot

ng

11-40

If You Cannot Solve a Problem

Customer Support (U.S.A.)

If you cannot solve the problem after havng referred to the nformaton n ths chapter, 
contact Canon Customer Care Center at 1-800-828-4040 between the hours of 8:00 A.M. 
to 8:00 P.M. EST Monday through Frday and 10:00 A.M. to 8:00 P.M. on Saturday. On-lne 
support for 24 hours s also avalable at the webste. 
http://www.canontechsupport.com/

Customer Support (Canada)

Canon Canada Inc., offers a full range of customer techncal support optons*:

For step-by-step troubleshootng, e-mal techncal support, the latest drver or document 
downloads, and answers to frequently asked questons, vst 
http://www.canon.ca/
Free lve techncal support 9 A.M. to 8 P.M. EST Monday through Frday (excludng 
holdays) for products stll under warranty 1-800-652-2666
For the locaton of the authorzed servce faclty nearest you, vst  
http://www.canon.ca/ or 1-800-652-2666
If the problem cannot be corrected by usng one of the above techncal support optons, 
repar optons are avalable at the tme of your call to the lve techncal support number 
above or va the webste at http://www.canon.ca/
Support program specfcs are subject to change wthout notce.

Please have the following information ready when you contact Canon:

Product name (LASER CLASS 810/LASER CLASS 830)
Seral number (On the label located at the back of the machne)
Place of purchase
Nature of problem
Steps you have taken to solve the problem and the results

If the machne makes strange noses, emts smoke or odd odor, turn off the man power swtch mmedately, 
dsconnect the power cord, and contact Canon Customer Care Center. Do not attempt to dsassemble or repar 
the machne yourself.

Attemptng to repar the machne yourself may vod the lmted warranty.

–

–

–

–

*

–
–
–
–
–

Содержание Laser Class 810





























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды