Canon IXUS 245 HS Скачать руководство пользователя страница 133

Страница: 133 / 284

133

Applying Special Effects

Still Images

Movies

Shooting with Color Accent

Choose a single image color to keep and change other colors to black and

white.

Choose [

Follow steps 1 – 2 on

124 and

choose [

Access the setting screen.

Touch [ ].

The original image and the Color Accent

image are displayed one after another.

By default, green is the color that will be

kept.

Recorded Color

Specify the color.

Position the center frame over the color

to keep, and then touch the frame at the

bottom of the screen.

The specified color is recorded.

Specify the range of colors to

keep.

Touch [

][

] to adjust the range.

To keep only your specified color, choose

a large negative value. To keep colors

similar to your specified color as well,

choose a large positive value.

Touch [

] to return to the shooting

screen.

Shoot.

COP

Содержание IXUS 245 HS





























































































































































































































































































Результаты поиска

Содержание IXUS 245 HS

Отзывы:

Canon IXUS 245 HS, Руководство пользователя, Страница: 133 / 284

Результаты поиска

Содержание IXUS 245 HS

Отзывы: