Canon iR2318 series, Руководство по обслуживанию, Страница: 63 / 308

Chapter 2
2-9
2.1.6 Before Starting the Work (230V CSPL)
0020-4251
1-1 Points to Make Before Installation
Be sure to go through the following before starting the work:
1) If you are installing the machine after moving it from a cold to warm location, be sure to leave the machine unpacked for at least 2 hours so that the machine is
fully used to the site temperature, thus avoiding image faults caused by condensation. (The term "condensation" refers to the formation of droplets of water on
the surface of a metal object brought in from a cold to warm place, i.e., as the result of the rapid cooling of the moisture (vapor) around the object.)
2) The machine weighs a maximum of about 37.9 kg. Be sure to work in a group of 2 persons when lifting it.
3) The machine is manufactured considering that it would be connected to IT Power Distribution System in Norway.
1-2 Checking the Contents
Check to be sure that none of the following contents is missing:
F-2-11
Check the documentation and CD against the following table:
1-3 Names of Parts
F-2-12
[1] Drum unit ---1 [3] Cassette size label ---1
[2] Power cable ---1 [4] Caution sheet ---1
Driver/Utility CD-ROM
User Manual CD-ROM
Operators manual: Users Guide
Operators manual: Easy Operation Guide
[1] Copyboard cover [9] Left door
[2] Reader front cover [10] Left cover (rear)
[3] Control panel [11] Reader left cover
[4] Delivery tray [12] Reader right cover
[5] Front cover [13] Reader rear cover
[6] Cassette 1 [14] Rear cover
[7] Left cover (front) [15] Right cover (upper)
A3
B5
LTR
A4
LGL
8K
B4
LTR
A4
B5
STMT
A5
11 17
16K
[1]
[3]
[2]
[4]
Bitte stellen Sie den Hebel zum
Erkennen des Papierformats auf
das neue Format ein.
Set the size detector lever to the
new paper size.
Placer I’indicateur de format sur
le nouveau format.
FU5-xxxx
[9]
[10]
[11]
[2]
[1]
[3]
[4]
[5]
[6]
[7]
[8]
[12]
[13]
[14]
[15]
[16]