Canon iR2318 series, Руководство по обслуживанию, Страница: 284 / 308

Chapter 14
14-12
F-14-3
14.9.5 Aging Test
0022-5250
Not used.
14.9.6 Factory Test
0022-5252
Sensor Check
This mode is used to verify the status of the unit sensors from LCD indications. LCD indications change as the associated sensors turn on and off.
- Sensor [1]
Item Explanation
Sensor Check Sensor actuation test
ADF Feed test ADF operation test
Book Feed test Host machine operation test
Panel test LCD, LED and control key operation test
Lamp test Contact sensor illumination test
Display Position Sensor Name Explaination
CAS - Cassette 1 paper sensor (SR204) 0:Document presence, 1:Document absence
REG - Registration sensor (SR209) 0:Document presence, 1:Document absence
DEL(left) - Fixing dellivery sensor (SR202) 0:Document presence, 1:Document absence
DEL(right) - No.1 delivery sensor (SR203) 1:Document presence, 0:Document absence
MULTI - Manual paper sensor (SR208) 1:Document presence, 0:Document absence
TONER - Waste toner full sensor (SR206) 0:Full, 1:Available
2ND-DEL - No.1 paper full sensor (SR207) 0:Document presence, 1:Document absence
OP1(left) Left Cassette 2 retry sensor (SR6) 0:Document presence, 1:Document absence
OP1(right) Right Cassette 2 paper sensor (SR5) 0:Document presence, 1:Document absence
OP2(left) Left Cassette 3 retry sensor (SR6) 0:Document presence, 1:Document absence
OP2(right) Right Cassette 3 paper sensor (SR5) 0:Document presence, 1:Document absence
OP3(left) Left Cassette 4 retry sensor (SR6) 0:Document presence, 1:Document absence
OP3(right) Right Cassette 4 paper sensor (SR5) 0:Document presence, 1:Document absence
D.PATH(left) Left Duplex paper sensor 1 (SR1002) 0:Document presence, 1:Document absence
D.PATH(right) Right Duplex paper sensor 2 (SR1003) 0:Document presence, 1:Document absence
Use it to make sure that the print
pattern does not have white lines
or uneven image.
Use it to make sure that the print
pattern does not have contraction/
elongation of an image or dirt/black
line.s