Canon iR2018i Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 444

Canon iR2018i Скачать руководство пользователя страница 72

Using the Touch Panel Display

2-15

2

B

a

s

ic

O

per

at

ion

s

Using the Touch Panel Display

This section describes the keys that are frequently used on the touch panel display. Information
on how to adjust the brightness of the touch panel display is also provided.

CAUTION

Press the touch panel display keys gently with your fingers. Do not press the touch panel
display with a pencil, ballpoint pen, or other sharp objects that can scratch the surface of the
touch panel display. Doing so may damage the touch panel display.

NOTE

Before using the touch panel display, peel off the protective film from the display.

Frequently Used Keys

The keys that are used frequently on the touch panel display are:

Press to cancel the mode that you are currently setting, or a mode that has already been
set, on screens other than the Additional Functions screen. Also, press to close the
current mode’s setting screen, and keep the original settings set from the Additional
Functions screen.

Press to confirm the current settings and proceed to the next step in the procedure.

Press to go back to the previous step in the procedure, without saving the current
settings.

Press to close the current screen.

Press to confirm the current settings of a mode.

«
...
70
71
72
73
74
...
»

Содержание iR2018i





























































































































































































































































































































































































































































Отзывы:

Нет отзывов