Canon iR2018i, Справочное руководство, Страница: 423 / 444

List of Error Messages 8-48
8
T
ro
u
b
les
ho
oti
n
g
List of Error Codes without Messages
If a job or operation does not complete successfully, check the error code, and perform the
necessary operations according to the error code displayed. You can check the error code on
the Details screen when you press [Log] on the System Monitor screen. (See “Copy/Print Job
Details,” on p. 5-9.)
If a send, receive, or fax job does not complete successfully, the error code is printed in the
Results column on the Activity Report and TX Report. (See Chapter 11, “Printing
Communication Reports,” in the
Sending and Facsimile Guide .)
Perform the necessary procedures according to the error code.
NOTE
If a send job is canceled, “STOP” is printed in the Results column on the TX Report.
# 001
Cause Paper or originals are jammed.
Remedy Remove any jammed paper or originals. (See “Clearing Paper Jams,” on p. 8-3, and “Feeder
(DADF-P2),” on p. 8-16.)
# 009
Cause 1 There is no paper.
Remedy Load paper. (See “Paper Drawers,” on p. 7-2.)
Cause 2 The paper drawer is not inserted correctly.
Remedy Insert the paper drawer properly. (See “Paper Drawers,” on p. 7-2.)
# 037
Cause Documents could not be received because there was insufficient memory available.
Remedy Erase unnecessary documents and documents with errors from memory to increase the
amount of available memory. (See Chapter 7, “Checking/Changing the Send/Receive
Status,” in the
Sending and Facsimile Guide .)