Canon iR2018i Скачать руководство пользователя страница 289

Страница: 289 / 444

Remote UI

6-36

ste

anag

tti

ngs

Remote UI

You can set whether to enable the Remote UI to operate the machine and change settings.

NOTE

•

For more information on the Remote UI, see the Remote UI Guide.

•

For instructions on configuring the Ethernet port, see the Network Guide.

•

The default setting is ‘On’.

Press

(Additional Functions)

➞

[System Settings]

➞

[Remote UI On/

Off].

If the System Manager ID and System Password have been set, enter the System Manager ID
and System Password using

(numeric keys)

➞

press

(Log In/Out).

NOTE

If the desired setting is not displayed, press [

▼

] or [

▲

] to scroll to the desired setting.

Содержание iR2018i





























































































































































































































































































































































































































































Результаты поиска

Содержание iR2018i

Отзывы:

Canon iR2018i, Справочное руководство, Страница: 289 / 444

Результаты поиска

Содержание iR2018i

Отзывы: