Canon iR2018i Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 444

Canon iR2018i Скачать руководство пользователя страница 10

ix

Thank you for purchasing the Canon iR2030/iR2025/iR2022i/iR2018i. Please read this manual
thoroughly before operating the machine to familiarize yourself with its capabilities, and to make the
most of its many functions. After reading this manual, store it in a safe place for future reference.

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, restrictions, handling
precautions, and instructions that should be observed for safety.

WARNING

.

Indicates a warning concerning operations that may lead to death or injury to
persons if not performed correctly. In order to use the machine safely, always
pay attention to these warnings.

CAUTION

.

Indicates a caution concerning operations that may lead to injury to persons, or
damage to property if not performed correctly. In order to use the machine
safely, always pay attention to these cautions.

IMPORTANT

.

Indicates operational requirements and restrictions. Be sure to read these
items carefully in order to operate the machine correctly, and to avoid damage
to the machine.

NOTE

.

Indicates a clarification of an operation, or contains additional explanations for
a procedure. Reading these notes is highly recommended.

Preface

How to Use This Manual

«
...
8
9
10
11
12
...
»

Содержание iR2018i





























































































































































































































































































































































































































































Отзывы:

Нет отзывов