Canon iR2018 Series, Портативное руководство, Страница: 22 / 122

Chapter 3
10
3.2 Jam Code
3.2.1 Jam Codes (Related to Printer Unit)
0017-6038
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
T-3-2
3.2.2 Jam Codes (Related to Finisher)
0017-6039
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
T-3-3
3.2.3 Jam Codes (Related to ADF)
0017-6040
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
T-3-4
3.2.4 Jam Codes (Related to Duplex Unit)
0017-6041
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Code Name Sensor No. Description
0104 Delay jam in paper
pickup section SR209 The registration sensor cannot detect the leading edge of paper from the moment paper pickup starts to the
moment the jam detection time is reached.
0208 Stationary jam in paper
pickup section SR209 The registration sensor cannot detect the no paper status specified time before the leading edge of the picked
up paper reaches this sensor.
010c Delay jam in deliver
section SR202,
SR203,
SR209 - The fixing delivery sensor cannot detect presence of paper within the specified time after turning on of the
registration clutch.
- The fixing delivery sensor detected absence of paper within the specified time after the sensor had detected
presence of paper within the specified time after turning on of the registration clutch.
- The No.1 delivery sensor cannot detect presence of paper within the specified time after turning on of the
fixing delivery sensor.
0210 Stationary jam in
delivery section SR202,
SR203 - The fixing delivery sensor cannot detect absence of paper within the specified time after turning off of the
registration clutch.
- The fixing delivery sensor cannot detect absence of paper within the specified time after the sensor detected
the leading edge of paper.
- The No.1 delivery sensor cannot detect absence of paper within the specified time after the sensor detected
the leading edge of paper.
0214 Stationary jam in
machine SR202,
SR203,
SR209 Paper was detected in the paper transport path during initial rotation, during automatic delivery, at the end
of cleaning, or at reception of an emergency stop command.
1118 Door open jam SR202,
SR203,
SR209,
SW2, SW3 The door was opened when there was printing paper in the transport path.
Code Name Sensor No. Description
0130 Delayed feed jam PI5 The inlet sensor is not turned on within the specified time after reception of a paper ejection signal from
the host machine.
0231 Staying paper jam PI5 The inlet sensor is not turned off even if paper is fed by the specified distance after the leading edge of
the paper from the host machine has passed through the sensor.
0033 Stack ejection jam PI1 When a paper stack is ejected, the HP sensor is not turned off within the specified time.
0035 Staple jam Stapler HP
sensor
(built in
stapler) The stapler HP sensor was turned off once after start of stapler operation, but the HP has not been reached
within the specified time.
1036 Power-on jam PI5 The inlet sensor detected paper at power-on.
1137 Door open jam SW1 The front cover switch detected opening of the front cover during standby or copy operation.
Code Name Sensor No. Description
0000 Unknown jam - Other errors
0007 Initial stationary PI6,PI7,PI8 Paper is detected in the transport path before the DADF starts initial operation.
0008 Read sensor delay PI7,PI8 The read sensor does not detect paper when the paper has been fed by the predetermined distance
since reception of a pickup request.
0009 Read sensor stationary PI7 The trailing edge of paper is not detected when the paper has been fed by the predetermined distance
since detection of it by the read sensor.
000a Paper absence (Pull out the document.) PI11 The Document set sensor has been held off since start of pickup.
000c Delivery reversal sensor delay PI6,PI7 The delivery reversal sensor does not detect paper since the paper has been fed by the predetermined
distance since the read sensor was turned on.
000d Delivery reversal sensor stationary PI6 The trailing edge of paper is not detected when the paper has been fed by the predetermined distance
since the delivery reversal sensor detected the paper.
000e ADF cover open PI10 The feeder cover was opened during operation (of the drive system).
000f User ADF open sensor of
the reader
unit The ADF was opened during operation (of the drive system).
0010 Pickup NG - The registration sensor has been held off since paper pickup started.