Canon iPF710 - imagePROGRAF Color Inkjet Printer, Руководство по обслуживанию

Страница: 55 / 238

Chapter 1
1-44
1.7.2 Other Precautions
1.7.2.1 Printhead
0013-1936
a. Handling the printhead
Do not unpack the printhead until it is ready for immediate use.
When mounting the printhead on the printer, remove protective caps 1 and 2 in this order by holding them
by the lugs. To prevent possible damage to the nozzle section, do not replace protective cap 2 on the
printhead once it has been removed.
After the printhead is removed of its protective caps, assemble it into the printer promptly to prevent the
nozzles from being clogged by foreign matter adhering to the printhead to or a dried ink.
Depress the printhead fixer lever until it clicks into position.
To prevent the problems of nozzle clogging and poor ink suction that may be caused by adhering foreign
matter, never touch the nozzle section and the ink port of the printhead or never wipe their surfaces with
tissue paper or the like. Remember also to keep hands of the electrode section.
The printhead cannot be disassembled/reassembled or rinsed in water.
Memo:
A clogged nozzle or poorly sucked ink could result in a print defect, such as a periodic print void or poor
coloring. If these problems persist even after cleaning, replace the printhead with a new one.
F-1-20
T-1-21
[1] Lugs [4] Nozzle section
[2] Protective cap 1 [5] Electrode section
[3] Protective cap 2 [6] Ink port
[3]
[5]
[1]
[2]
[4]
[6]