Canon IPF670, Руководство пользователя

Страница: 586 / 652

Cause Corrective Action
In the Control Panel menu, Cutting Mode is set to Eject or Man-
ual .
If the Cutting Mode is Eject , press the Cut button to cut the paper.
If the Cutting Mode is Manual , cut rolls with scissors or the like.
(See " Specifying the Cutting Method for Rolls .")
➔
P.369
Depression on the leading edge is left Depression on the leading edge is left
Cause Corrective Action
Keeping a roll in the printer for a long time
without printing on it may leave a depression
on the leading edge. When printing quality is most important, we recommend setting TrimEdge Reload to On
or Automatic so that the paper edge is automatically cut before printing.
(See "
Menu Structure
.")
➔
P.452
The size of clear film cannot be detected The size of clear film cannot be detected
Cause Corrective Action
The Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.
(See "
Cleaning Inside the Top Cover
.")
➔
P.563
Roll Paper is Continuously Ejected Roll Paper is Continuously Ejected
Cause Corrective Action
Although sheets are se-
lected as the paper
source, a roll was ad-
vanced. After roll ejection stops, follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Open the Roll Cover.
3.
Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure that both
ends of the roll are rewound evenly.
4.
Pull the Release Lever forward.
5.
Load the roll. At this time, be sure to press the Load button and select " Load Roll Paper ".
(See "
Loading Rolls in the Printer
.")
➔
P.357
Depression on the leading edge is left iPF670
User's Guide
Troubleshooting
Problems Regarding Paper
586