Canon iP3000 - PIXMA Photo Printer Скачать руководство пользователя страница 1

Install the Ink Tanks

Unpack the Printer

2

3

4

5

Prepare the Printer

Install the Print Head

Connect the Printer 

and Load Paper 

Start Here

Easy Setup Instructions 

iP3000

 Series

Photo Printer

Insert the ink tank into the correct slot.  
(Refer to the color guide on the print head holder).

Press down until the ink tank clicks into place.

Paper Support

Top Cover

Paper Output Tray

Inner Cover

Remove the shipping tape from the paper 
guide. Pinch the paper guide and slide it to  
the left. Load a few sheets of blank paper  
into the auto sheet feeder, then slide the  
paper guide toward the left edge of the paper.

3

Paper
Guide

Auto Sheet

Feeder

Slide the print head into the holder.  
The print head will rest at a slight angle.

Remove the print head from its package.

Remove the orange protective cap 
from the print head. 

NOTE:

 Do not touch the print head nozzles 

and the electrical contacts.

Lower the print head lock lever and press  
it down until it clicks into place.

Raise the print head lock lever.

Electrical Contacts

Print Head Nozzles

Tear at notch to open

Plug the power cord into the back of the  
printer and connect the other end to a  
power outlet. Press the POWER button.  
The printer will initialize.

Lower the front cover. Raise the top cover. 
Remove the shipping tape and lower the  
inner cover.

The print head holder automatically moves  
to the center. Remove the protective tape.

Write down the serial number located to 
the right of the print head holder . You will  
need this later to register the product.

Remove the shipping tape from the  
front and back of the printer. 

POWER

Button

POWER

Lamp

Serial Number

Protective Tape

Inner Cover

Top Cover

Front Cover

PIXMA iP3000 Series

Photo Printer

Carefully remove all items from the box.

Documentation  

and Software Kit

Peel back the orange tab and completely  
remove the plastic wrapper from the Yellow  
Ink Tank (BCI-6Y). 

Twist off and discard the orange protective cap.

Insert the remaining three ink tanks into 
their assigned slots.

Close the inner cover, then the top cover.  
Lift open the paper support and extend the  
paper output tray. 

Power Cord

PIXMA iP3000 Series 

 Print Head

NOTE: 

The printer will perform a print head  

cleaning. Wait until the POWER lamp displays  
a steady green light before proceeding.

Ink Tanks

          BCI-6C Cyan            BCI-6M Magenta

BCI-3eBK Black                                                  BCI-6Y Yellow

click

click

Continue with Step 6 
on side two.

NOTE: 

To avoid spilling ink, never press on the 

sides of an ink tank.

Protective Cap

IMPORTANT:

 Be sure the printer is  

off before continuing, or the computer  
will attempt to install the printer  
driver before the printer is ready.

TURN THE PRINTER OFF

.

Connect one end of the USB cable 
to the computer, the other to the printer.

1

2

1

2

3

4

5

1

5

4

3

1

2

1

2

3

4

5

Serial Number

Location

Отзывы: