manualshive.com logo in svg

Canon IP2800 series, Руководство пользователя, Страница: 210 / 326

Поделиться
Скачать
Canon IP2800 series Скачать руководство пользователя страница 210

Note

• If you are using the XPS printer driver, the "Canon IJ Status Monitor" becomes the "Canon IJ XPS

Status Monitor".

About

Opens the 

About dialog box

.

The version of the printer driver, plus a copyright notice, can be checked.
In addition, the language to be used can be switched.

Initial Check Items

Check that the printer power is on, and open the cover of the printer.
Check the following items for each ink. Then, if necessary, perform 

Nozzle Check

 or 

Cleaning

.

•

Check the amount of ink

 remaining in the cartridge.

• Make sure that you push in the ink cartridge completely until you hear a clicking sound.
• If an orange tape is adhered to the ink cartridge, peel it off completely.

Any remaining tape will hinder ink output.

• Check that the ink cartridges are installed in their correct positions.

Start Print Head Alignment dialog box

This dialog box allows you to adjust the attachment position for the print head, or to print the current
setting value for the print head position.

Note

• For a detailed procedure on head position adjustment, see "

Aligning the Print Head Position from

Your Computer

."

Align Print Head

Aligns the print head.
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
Align the print head immediately after installing the print head.

Print Alignment Value

Click this button to check the current setting value of the print head position.
Prints the current setting value for the print head position.

Print Head Alignment dialog box

To adjust the print head position, click 

Align Print Head

 in the 

Start Print Head Alignment

 dialog box,

and perform the operations instructed in the messages. The 

Print Head Alignment

 dialog box is then

displayed.
This dialog box allows you to check the printed pattern and adjust the print head position.

Preview Window

Displays the pattern of 

Print Head Alignment

, and checks the position of the selected pattern.

You can also change the setting by clicking the pattern on the screen directly.

Select the Pattern Number

Compare the printed adjustment patterns, and enter the pattern number of the pattern with the
least visible streaks or horizontal stripes into the corresponding box.

210

Содержание IP2800 series







































































































































































































































































































































Отзывы:

Нет отзывов