Canon ImageRunner C2550, Руководство принтера

Страница: 211 / 312

Printing Directly from the Remote UI
5-33
5
Ho
w
to Use the Direct
Pri
nt F
unction
[Image
Orientation] This setting specifies whether to print an image vertically or
horizontally.
•
If [Auto] is selected, orientation is automatically adjusted by
comparing length and width of the image (TIFF/JPEG data). If
the width is greater, the image is printed horizontally. If the
length is greater, the image is printed vertically.
•
If [Vertical] is selected, the image is printed vertically
regardless of its dimensions.
•
If [Horizontal] is selected, the image is printed horizontally
regardless of its dimensions.
[Print Position] This setting specifies the print position for the image.
•
If [Auto] is selected, the image is printed in the specified
position of the paper if the print position for the TIFF data is
specified. If the print position is not specified, the image is
printed in the center of the paper.
•
If [Center] is selected, the image is printed in the center of the
paper regardless of whether the print position of the TIFF data
is specified.
•
If [Top Left] is selected, the image is printed in the top left of
the paper regardless of whether the print position of the TIFF
data is specified.
[Zoom] This setting enlarges or reduces the size of an image to match
the printable area of the paper size specified.
If [Auto] is selected, the size of the image is automatically
enlarged or reduced to match the printable area of the
specified paper size. If the size of the image is larger than the
printable area, it is automatically reduced. If the size of the
image is smaller than the printable area, it is automatically
enlarged.
[Enlarge Print
Area] This setting specifies whether to enlarge the printable area to
the edge of the paper.
[2-Sided] This setting specifies whether to print on one-side or both sides
of the paper.
[Binding
Location] This setting specifies whether to place the binding position
along the long edge or the short edge of the paper. If the
margin is specified on the touch panel display, the binding
margin position is automatically adjusted on the front and back
sides of the paper.
For more information, see
"
Margin,
"
on p. 3-22.
[Show Warnings] This setting specifies the action to be taken if an error
associated with printing an image occurs on the machine.
•
If [On] is selected, an error message is displayed.
•
If [Off] is selected, an error message is not displayed.