Canon imageRUNNER C1335 Series, Руководство по обслуживанию

Страница: 57 / 607

2
2
2-26
2-26
Technical Explanation > Original Exposure and Feed System > Service Tasks > Actions at Parts Replacement
Technical Explanation > Original Exposure and Feed System > Service Tasks > Actions at Parts Replacement
■
Jam Detection
This machine detects jam using the Document End Sensor (PS02) and the Document
Sensor (PS03). The check timing to detect jam is already stored in the Main Controller PCB,
which determines the occurrence of a jam by the presence of an original in the areas of
corresponding sensors.
When a jam occurs, the machine stores the information by the code.
This machine's jam code can be checked by printing out a jam error history report from
service mode.
ACC ID Jam Code Type Sensor Name Sensor ID
01 0001 Delay Document End Sensor PS02
01 0002 Stationary Document End Sensor PS02
01 0004 Delay (at the time of reversing) Document End Sensor PS02
01 0005 Stationary (at the time of reversing) Document End Sensor PS02
01 0021 Timing Document End Sensor PS02
01 0071 Timing Error Timing Error Jam -
01 0094 Power-on Document End Sensor PS02
Document Sensor PS03
01 0096 Limited function mode DF Job Error Jam -
T-2-10
Service Tasks
■ Periodically Replaced Parts
None.
■
Consumable Parts
No. Parts name Parts
number
Quantity Estimated life Remarks
1 ADF Pickup Unit FM4-9859 1 50,000 sheets
2 Separation Pad FM4-9857 1 50,000 sheets
■ Periodical Servicing
None.
Perform as needed.
■ Actions at Parts Replacement
• Actions at Copyboard Glass Unit Replacement
• Actions at Scanner Unit (Reader side CIS) Replacement
• Actions at ADF Unit Replacement
T-2-11