Canon imageRUNNER ADVANCE System V3.13, Руководство по обслуживанию, Страница: 30 / 181

NOTE:
When a password is set for the security policy setting function, this password is required to execute [Initialize All Data/Settings] in
the [Settings/Registration] menu.
This prevents users other than security policy administrators from initializing the device and disabling the security policies.
Linked operation with the Restrict Service Representative Access function
Linked operation with the Restrict Service Representative Access function can be set as one of the policies.
However, if the "Restrict Service Representative Access" function is enabled, execution of the service mode for initializing
the above-mentioned policy password is restricted and the service mode cannot be executed.
Security policy management settings
Refer to the user's guide at the following URL for information on how to manage and set the security policy.
[Top > Managing the Machine > Applying a Security Policy to the Machine]
https://oip.manual.canon/
Exporting and Importing Setting Information
Since security policy settings are covered by the setting information export/import function (hereinafter referred to as the [Import/
Export All] function), the settings can be exported and imported using the [Import/Export All] function.
For more information, refer to the User's Guide [Top > Mnaging the Machine > Managing the Machine from a Computer (Remote
UI) > Importing/Exporting the Setting Data] at the following URL.
https://oip.manual.canon/
Differences between Security Administrators and System
Administrators
In the Security Policy Settings function, in addition to the conventional "system administrator", there is an administrator called
"security administrator".
The system administrator is a user for whom the role "Administrator" is set on the User Management screen and is allowed to
operate/configure the settings of all the Settings/Registration menu items of the device.
Note that even the system administrator cannot operate or change the settings against the security policies set by the security
administrator described below.
The security administrator creates, applies, edits, backs up and restores security policies.
The security administrator is a system administrator (the user for whom the role "Administrator" is set on the User Management
screen) and knows the password for the security policy settings. (There is no role named "Security Administrator".)
Account Settings/Registration menu Policy-related
Add/
delete
Settings
(Adminis-
trator set-
tings)
Settings
(Other
than ad-
ministra-
tor set-
tings)
Initialize
(Settings/
Registra-
tion
menu)
Initialize
(Service
mode)
Imple-
ment/
change
Browse Backup/
restore
Disable
the re-
strictions
Security Administrator *1 *1 -
System Administrator *1 *1 - - - -
End users - - *1 - - - - - -
Service technician - - - - - -
Initializing the Security Administrator Password
If the password for the security policy settings is set on a device and then forgotten, the settings restricted by the policies cannot
be changed on the device.
In this case, the service technician can execute the following service mode to initialize the security policy administrator password.
• (LEVEL 2) COPIER > FUNCTION > CLEAR > PLPW-CLR
*1. Restricted by the policies
3. Security Function
25