Canon imageRUNNER ADVANCE DX 8905 Скачать руководство пользователя страница 1

Страница: 1 / 16

Important Safety Instructions

This chapter provides important safety instructions for
the prevention of injury to users of this machine and
others, and damage to property. Read this chapter
before using the machine and follow the instructions to
ensure that you use the machine properly. The Canon
online manual site (https://oip.manual.canon/) also
provides information on this machine. Read this
information also to ensure correct use.
Do not perform any operations not described in this
manual. Canon will not be responsible for any damages
resulting from operations not described in this manual,
improper use, or repairs or modifications not performed
by Canon or a third party authorized by Canon.

WARNING

Indicates a warning concerning operations that
may lead to death or serious personal injury if not
performed correctly. To ensure that you use the
machine safely, always observe these warnings.

CAUTION

Indicates a precaution for preventing the risk of
personal injury or property damage other than
a product fault due to improper use of the
machine. To ensure that you use the machine
safely, always observe these cautions.

IMPORTANT

Indicates important operational requirements
and restrictions that should always be observed
when using this machine. Always observe these
important items to avoid malfunctions, faults or
property damage due to improper machine
operation.

Safety-related Symbols

The following symbols are used on this product:

Power switch (On)

Power switch (Off )

Power switch (Stand-by)

Push-button switch (On

/Off

)

Protective earthing terminal

Electric shock warning: Hazardous voltage inside.
Do not remove the cover.

High temperature warning. Do not touch.

Class II equipment

Contains moving parts. Keep hands and other
body parts away from moving parts.
Electric shock warning: Unplug all power cords
from the power outlet.
Sharp edges. Keep hands and other body parts
away from sharp edges.

NOTE

Some models may use other symbols not listed here.

Installation

To ensure that you use this machine safely read the
following precautions carefully before installing the
machine in a suitable location.

WARNING

Do not install in the locations listed below

Doing so may result in a fire or electric shock.

• Locations that risk blocking the ventilation slots (too

close to walls or curtains or on materials such as
deep-pile carpets)

•  Damp or dusty locations
•  Near heating appliances or open flames
•  Near alcohol, paint thinners or other flammable

substances

Do not use a wireless LAN close to medical equipment
(only for products with a wireless LAN function)

Radio waves can interfere with medical equipment and
cause malfunctions that may lead to accidents.

CAUTION

Do not install in the locations listed below

Doing so could result in a fault or adversely affect people
or other equipment.

• Outdoors or in locations exposed to direct sunlight
• Locations subject to temperature and humidity

extremes, whether low or high

• Locations subject to dramatic changes in

temperature or humidity

• Near equipment that generates magnetic or

electromagnetic waves

• Near electronic devices or precision equipment, such

as TVs, radios and computers

• Laboratories or other locations where chemical

reactions occur

• Locations heavily exposed to aerosol sprays,

ammonia or other corrosive gases

• Locations subject to instability or vibration
• Surfaces that may warp under the weight of the

machine or into which the machine is liable to sink
(carpets, straw matting, beds, etc.)

• Locations where air ventilated from the machine

directly impacts people

Provide adequate ventilation during use

This machine generates small amounts of ozone and
other emissions during normal use. These amounts are
too low to be harmful to humans. However, poorly
ventilated rooms should be adequately ventilated
during extended use or long print runs.

Do not remove the leveling feet after installation
(only for products with leveling feet)

Doing so may cause the machine to move or tip over,
resulting in injury.

IMPORTANT

When using a wireless LAN (only for products with a
wireless LAN function)

• Install the machine no more than 50 meters from the

wireless LAN router.

• As much as possible, install in a location where

communication is not blocked by intervening
objects. The signal may be degraded when passing
through walls or floors.

• Install the machine as far as possible from digital

cordless phones, microwave ovens or other
equipment that emits radio waves.

Connecting the telephone line (only for machines
that support faxes)

In certain circumstances, this machine may not be able
to communicate via some telephone lines or in some
regions. One such example is when the total resistance
of the telephone line and the machine exceeds 1700Ω.
In this event, contact your dealer or service
representative.

• This machine conforms to an analog telephone line

standard and can only be connected to ordinary
subscriber telephone lines. Connecting the machine
to a business line or other dedicated line may result
in faults. Always check the line before connecting.

About cables

• Use a modular cable that is shorter than 3 meters.
• Use a USB cable that is shorter than 3 meters.

Power Supply

WARNING

Using the power plug and cord correctly

Improper use may result in a fire or electric shock.

• Check that the power supply used for the machine is

safe and has a stable voltage.

• Use only a power supply that meets the specified

voltage requirements.

• Connect the machine to a securely grounded power

outlet using the power cord provided.