Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 392 | Manualshive

Страница: 392 / 456

Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 392

Third Party Software

This Canon product (the “PRODUCT”) includes third-party software modules. Use and
distribution of these software modules (the “SOFTWARE”) are subject to the conditions
below.

(1) You agree that you will comply with any applicable export control laws, restrictions
or regulations of the countries involved in the event that this product including the
SOFTWARE is shipped, transferred or exported into any country.
(2) Rights holders of the SOFTWARE retain in all respects the title, ownership and in-
tellectual property rights in and to the SOFTWARE. Except as expressly provided herein,
no license or right, expressed or implied, is hereby conveyed or granted by rights holders
of the SOFTWARE to you for any intellectual property of rights holders of the SOFT-
WARE.
(3) You may use the SOFTWARE solely for use with the PRODUCT.
(4) You may not assign, sublicense, market, distribute, or transfer the SOFTWARE to
any third party without prior written consent of rights holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may transfer the SOFTWARE only when (a)
you assign to a transferee all of your rights to the PRODUCT and all rights and obligations
under the conditions governing the SOFTWARE and PRODUCT and (b) such transferee
agrees in writing to be bound by all these conditions.
(6) You may not decrypt, decompile, reverse engineer, disassemble or otherwise reduce
the code of the SOFTWARE to human readable form.
(7) You may not modify, adapt, translate, rent, lease or loan the SOFTWARE or create
derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make separate copies of the SOFTWARE from the
PRODUCT.
(9) The human-readable portion (the source code) of the SOFTWARE is not licensed
to you.

Notwithstanding (1) through (9) above, in case any other license conditions accompany
third-party software modules, these software modules are subject to these other conditions,
as well.

ACCEPTANCE

THE TERMS OF THIS THIRD PARTY SOFTWARE STATED HERE OR IN RE-
LATED WARRANTY PROVISIONS SHALL BE DEEMED ACCEPTED UPON
YOUR USE OF THE PRODUCT FOR ONE OR MORE OF ITS NORMAL PUR-
POSES, IF THERE HAS BEEN NO OTHER PRIOR EXPRESS ACCEPTANCE.

Chapter 13 - Third party software

392

Third Party Software

«
...
390
391
392
393
394
...
»

Содержание imageRUNNER ADVANCE C9075S PRO









































































































































































































































































































































































































































































Отзывы:

Нет отзывов