Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 301 | Manualshive

Страница: 301 / 456

Canon imageRUNNER ADVANCE C9075S PRO Скачать руководство пользователя страница 301

Replace the toner cartridge

Introduction

The system informs you on the dashboard of the operator panel when new toner is re-
quired.

#

WARNING

Do not burn or throw used toner cartridges into open flames, as this may cause
toner remaining inside the cartridges to ignite, resulting in burns or a fire.

#

CAUTION

•

Keep toner out of the reach of small children. If toner is ingested, consult a
physician immediately.

•

Take care not to allow toner to come into contact with your hands or clothing.
If toner gets onto your hands or clothing, wash it off immediately with cold
water. Washing it off with warm water will set the toner, and make it impos-
sible to remove toner stains.

#

IMPORTANT

• Use only toner cartridges intended for use with this machine.
• Do not replace toner cartridges until the message asking you to do so appears.
• You can replace a toner cartridge while the printer is printing.
• The color of the toner to replace is displayed on the touch panel display. If multiple

toner cartridges must be replaced, replace the toner cartridges in the following
order: Black, Yellow, Magenta, Cyan.

• If you continue copying or printing in black-and-white after cyan, magenta, or

yellow toner runs out, do not remove the depleted toner cartridges from the ma-
chine.

• You can display an error message informing the user that the remaining toner is

low.

Chapter 9 - Paper, toner, and staples

301

Replace the toner cartridge

«
...
299
300
301
302
303
...
»

Содержание imageRUNNER ADVANCE C9075S PRO









































































































































































































































































































































































































































































Отзывы:

Нет отзывов