Canon imagerunner advance C5550i, Руководство пользователя

Страница: 726 / 1556

Distributing the Device Information to Other Canon
Multifunction Printers
13WK-0EL
Various machine settings (device information) can be sent over the network and automatically applied to other Canon
multifunction printers. With this function, you can designate a host machine whose registered information (such as
the settings in the Settings/Registration menu and address lists) is distributed to other client machines, enabling you
to configure the same settings as the host machine. This makes it easier to incorporate new multifunctional printers
into your system, and it enables you to operate multiple machines with the same settings, which simplifies
management operations even when you increase the number of machines. For more information on the machine
information that can be distributed, see Settings/Registration(P. 731) .
● If both the host and client machines are imageRUNNER ADVANCE series models, the device information can
be distributed. It is also possible to receive some setting information from models other than those in this
series. However, some information may not be distributed properly. <Device Management> <Device
Information Distribution Settings>(P. 810)
● Some device information may not be distributed properly when certain optional equipment is attached to
the machine.
Configuring the Distribution Settings
Follow the procedure below to perform distribution.
Check the basic configuration.
● Are the host and client machines connected properly over the network?
● Are the TLS key and certificate configured on the client machine?
Configuring the Key and Certificate for TLS(P. 604)
● When automatically searching for the client machines, make sure that the SLP
communication is available between the machines. Monitoring the Machine From
Device Management Systems(P. 58)
Managing the Machine
714