Canon imagerunner advance C5550i, Руководство пользователя

Страница: 558 / 1556

Using a Password to Protect the Security Policy Settings
13WK-0A4
It is recommended that you use a password to protect the machine settings related to security policy. By setting a
password, the privilege for modifying the security policy settings can be restricted only to the information security
administrators who know the password. To set a password, log in to the Remote UI with Administrator privileges.
1
Start the Remote UI. Starting the Remote UI(P. 648)
2
Click [Settings/Registration] on the portal page. Remote UI Screen(P. 649)
3
Click [Security Settings] [Security Policy Settings].
➠
The [Confirm Security Policy] page is displayed.
4
Click [Password Settings].
5
Enter a password and click [OK].
● Use alphanumeric characters or symbols for the password.
● Make sure that the password is entered correctly, and enter the new password again in [Confirm:].
To change the password
● Enter the current password in [Old Password:] and the new password in [New Password:], then enter the
new password again in [Confirm:] and click [OK].
To remove the password
● Enter the current password in [Old Password:], and click [OK] without entering any value for [New
Password:] or [Confirm:] (leave them blank). If an input character limit has been configured in [Password
Settings Policy], a value must be entered for this setting. Cancel the limit before removing the password.
Security Policy Setting Items(P. 550)
Managing the Machine
546