Canon IMAGERUNNER ADVANCE C5051, Начало работы, Страница: 92 / 252

5
Settings Common to the Network Protocols
Network Environment Setup Procedures 5-2
Network Environment Setup Procedures
Before using the machine in a network environment, it is necessary to perform the following setup procedures.
1
Network Cable Connection (See “Connecting the Machine to a Computer or Network,” on p . 5-3 .)
Connect the machine to the network using the network cables.
2
Interface Settings (See “Interface Settings,” on p . 5-9 .)
Specify the interface settings for communication between the machine and computers on your network. To specify the settings, use:
The machine's control panel
The Remote UI (via a web browser)
•
•
3
Communication Environment Setup (See “Communication Environment Setup,” on p . 5-11 .)
Set up the environment for communication between the machine and computers on your network.
4
IEEE802 .1X Authentication Settings (see e-Manual > Network .)
Specify the settings of IEEE802.1X authentication.
If you are using the imagePASS or the PS-GX, see the manual provided with the imagePASS or the PS-GX.
If you are using the imagePASS or the PS-GX, some functions are not available with this machine. For details, see the manual provided with
the imagePASS or the PS-GX.
•
•