Canon IMAGERUNNER ADVANCE C5030, Руководство по обслуживанию, Страница: 405 / 1455

4
4
4-139
4-139
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (Bk) > Procedure
Parts Replacement and Cleaning > Image Formation System > Removing the Hopper (Bk) > Procedure
Removing the Hopper (Bk)
■ Preparations
1) Release the lock of Toner Container (By service mode).
2) Open the Front Cover, the Right Lower Cover and Right Upper Cover.
3) Remove the ITB Unit.
4) Remove the Process Unit.
5) Remove the Color Drum Heater (When the option is installed).
6) Remove the Drum Heater (Bk).
7) Remove the Toner Container Front Inner Cover.
8) Remove the Hopper (C).
■ Procedure
1) Remove the Harness from the Fixing Guide.
Guide
Harness
2) Remove all the Toner Trays.
• 3 screws (M4 binding)
x3
F-4-260
F-4-261
3) Remove the Duct Sheet.
• 2 screws (binding)
x2
4) Remove the Hopper Unit.
• 1 connector
• 1 wire saddle
• 6 screws (RS)
• 3 fixing guides
x4
x2
x3
Connector
Fixed guide
Wire saddle
F-4-262
F-4-263