Canon imageRUNNER ADVANCE C3325 Series, Руководство по обслуживанию

Страница: 325 / 951

5
5
5-2
5-2
Adjustment■>■Pickup■Feed■System■>■Image■position■adjustment■>■Mechanical■Adjustment
Adjustment■>■Pickup■Feed■System■>■Image■position■adjustment■>■Mechanical■Adjustment
Pickup■Feed■System
Image■position■adjustment
CAUTION:■
Adjusting■the■1st■side■also■changes■the■margin■on■the■2nd■side.■If■the■difference■
between■the■1st■and■the■2nd■sides■is■+/-■0.5■mm■or■less,■do■not■adjust■the■2nd■side.
<Reference:■■Standard■value>
Leading■edge:■4.0+1.5/-1.0■mm■(front■side,■back■side)
Left■edge:■2.5+/-1.5■mm■(front■side)■/■2.5+/-2.0■mm■(back■side)
1)■After■setting■the■service■mode■(level■1)■as■shown■below,■press■the■■Start■key■and■output■a■
test■print■(2-sided■print)■■from■each■of■the■paper■sources.
•■ COPIER■>■TEST■>■PG■>■TYPE■=■5
•■ COPIER■>■TEST■>■PG■>■COLOR-K■=■1
•■ COPIER■>■TEST■>■PG■>■COLOR-Y/M/C■=■0
•■ COPIER■>■TEST■>■PG■>■2-SIDE■=■1
•■ COPIER■>■TEST■>■PG■>■PG-PICK■=■each■of■the■paper■sources
CAUTION:
At■2-sided■printing,■paper■is■output■with■the■1st■side■up■and■2nd■side■down.
When■checking■the■leading■edge■margin■on■the■1st■side,■check■the■up■side■of■paper,■
and■check■the■margin■on■the■rear■side■with■respect■to■the■feed■direction.
CAUTION:
If■the■margin■is■not■within■the■standard■values,■perform■the■adjustment■of■each■cassette■
in■the■following■order:
Order Cassette■1 Cassette■2 Cassette■3/4
1 Software■■Adjustment Software■■Adjustment Mechanical■Adjustment
2 - Mechanical■Adjustment Software■■Adjustment
*:■Hardware■adjustment■is■not■performed■for■Cassette■1.
T-5-1
■
■
Mechanical■Adjustment
1)■Pull■out■the■Cassettes.
2)■Check■the■value■of■the■scale■on■the■Adjustment■Plate.
Scale
3)■Loosen■the■Fixation■screw.
1x
F-5-1
F-5-2