Canon imageRUNNER ADVANCE C250iF, Руководство для начинающих

Страница: 78 / 96

76
Specifications
Network Environment
(Hardware Specifications)
Item Specifications
Network Interface 10Base-T/100Base-TX/1000Base-T (RJ-45)
Network Environment
(Software Specifications)
Item Specifications
Protocol Supported TCP/IP:
Frame type:
Ethernet II
Print applications:
LPD/Raw/IPP/IPPS/FTP/WSD/SMB/NetWare
IPX/SPX
Frame type:
Ethernet II/Ethernet 802.2/Ethernet 802.3/Ethernet SNAP/Auto Detect
Print applications:
Bindery PServer/NDS PServer/RPrinter/NPrinter
Printer Settings
(Software Specifications)
Item Specifications
Resident Fonts PCL:
93 Scalable fonts, 2 OCR fonts, 10 Bitmap fonts, and AndaleFont
*
(Japanese, Korean, Simplified
Chinese, Traditional Chinese)
PS:
136 Scalable fonts
* The optional PCL International Font Set needs to be activated to use Andale® and WorldType® Collection, or
Andale Mono WT.
Printable Area PCL5c, PCL6:
Reduced to 1/8" (4.2 mm) from the top, bottom, left, and right edges of the paper.
PostScript 3:
Reduced to 1/8" (4 mm) from the top, bottom, left, and right edges of the paper.
When printing in the Expand Print Region and Print mode, the upper margin becomes 1/8" (4
mm), the lower margin becomes 1/8" (2.5 mm), and the side margins both become 1/8" (4.2 mm).
The printable area is enlarged.
When an original has data that extends all the way to the edges, even if you select [Expand Print
Region and Print], the periphery of the data may be cut off when printing. In this case, specify the
reduction ratio in the printer driver so that data is not cut off, and perform printing again.