Canon imageRUNNER Advance C2020i Скачать руководство пользователя страница 76

Страница: 76 / 160

Routine Cleaning

If the original is not copied clearly, clean the following parts of the machine. For high-quality printouts, we recommend

cleaning these parts once or twice a month.

Platen glass
Underside of the Feeder/Platen Cover
Feeder’s rollers

●
●
●

When cleaning the machine, first turn OFF the main power switch, and disconnect the power cord.

Failure to observe these steps may result in a fire or electrical shock.

Disconnect the power cord from the power outlet regularly, and clean the area around the base of

the power plug’s metal pins and the power outlet with a dry cloth to ensure that all dust and grime is

removed. If the power cord is connected for a long period of time in a damp, dusty, or smoky location,

dust can build up around the power plug and become damp. This may cause a short circuit and result in

a fire.

•

Do not dampen the cloth too much, as this may damage the original or break the machine.

Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so may result in damage to the plastic

parts.

The feeder is an optional product.

Platen Glass and Underside of the Feeder/Platen Cover

If the platen glass or the underside of the feeder/platen cover is dirty, the original may not be scanned clearly, or the size of

the original may be detected incorrectly.

Clean the platen glass and the underside of the feeder/platen cover with a cloth

dampened with water, and then wipe them with a soft, dry cloth.

1. Clean the Platen Glass.

2. Clean the underside of the Feeder/

Platen Cover.

•

Содержание imageRUNNER Advance C2020i

































































































































































Результаты поиска

Содержание imageRUNNER Advance C2020i

Отзывы:

Похожие инструкции для imageRUNNER Advance C2020i

Бренды по названию

Популярные бренды

Canon imageRUNNER Advance C2020i, Основное руководство по эксплуатации

Результаты поиска

Содержание imageRUNNER Advance C2020i

Отзывы:

Похожие инструкции для imageRUNNER Advance C2020i

Бренды по названию

Популярные бренды