Canon imageRUNNER ADVANCE C2020, Руководство по обслуживанию

Страница: 289 / 292

ERROR CODE
E-25
5 Self Diagnosis (PDL Board)
E677
Main cause The connection between the host machine and the PDL board is faulty. The
system software is faulty. The hard disk is faulty. The PDL board is faulty.
The system controller PCB of the host machine is faulty.
Condition of
detection
0001 DPRAM size error
In communication for initialization, the DPRAM size returned by
the PDL board to the host machine has an error.
(The host machine is aware of the DPRAM size in advance; the
DPRAM is a dual-port RAM used for communication between the
host machine and the PDL board, and is mounted on the PDL
board.)
0002 Initialization communication error
In communication for initialization, the contents of communication
returned by the PDL board to the host machine have an error and,
therefore, communication cannot be established.
0004 PDL board disconnection
After the connection of the PDL board is recognized at power-on,
the PDL board is disconnected.
During power-up, monitoring is executed at intervals of 2 min;
however, if the CPU is not on (sleep state or the like), no error will
be identified even if the PDL board is discontented.
If the PDL board is disconnected in sleep state, the absence of the
PDL board will be recognized at the start of the CPU.
0080 Communication error
An error in communication has occurred after the communication
between the host machine and the PDL board has been established.
For communication related to the sleep mode (power control) of
the host machine, the response from the PDL board is disrupted for
2 min or more.