Canon imageRUNNER ADVANCE 8505i Скачать руководство пользователя страница 38

38

A

pp

en

dix

Appendix

This device complies with part 15 of the 

FCC Rules. Operation is subject to the 

following two conditions: (1) This device 

may not cause harmful interference, 

and (2) this device must accept any 

interference received, including 

interference that may cause undesired 

operation.

 

FCC CAUTION

Changes or modifications not expressly 

approved by the party responsible 

for compliance could void the user's 

authority to operate the equipment.

This equipment has been tested and 

found to comply with the limits for a Class 

A digital device, pursuant to Part 15 of the 

FCC Rules.

These limits are designed to provide 

reasonable protection against harmful 

interference when the equipment is 

operated in a commercial environment.

This equipment generates, uses, and can 

radiate, radio frequency energy and, if not 

installed and used in accordance with the 

Operator's Manual, may cause harmful 

interference to radio communications.

Operation of this equipment in a 

residential area is likely to cause harmful 

interference in which case the user will be 

required to correct the interference at his 

own expense.

This transmitter must not be co-located 

or operated in conjunction with any other 

antenna or transmitter.

This equipment complies with FCC 

radiation exposure limits set forth for an 

uncontrolled environment and meets 

the FCC radio frequency (RF) Exposure 

Guidelines. This equipment should be 

installed and operated keeping the 

radiator at least 20 cm or more away from 

person’s body.

Use of shielded cables are required to 

comply with Class

A limits in Subpart B of Part 15 of the FCC 

Rules.

Do not make any changes or 

modifications to the equipment unless 

otherwise specified in the manual. If you 

make such changes or modifications, you 

could be required to stop operation of 

the equipment.

If your equipment malfunctions, please 

contact your local authorized Canon 

dealer from whom you purchased the 

equipment (if under warranty), or with 

whom you have a servicing contract. 

If you are not sure who to contact, and 

have both purchased and are using the 

equipment in the U.S.A., please refer to 

the "SUPPORT" page on Canon U.S.A.'s 

Web site (http://www.usa.canon.com).

 

Laser Safety

This product is confirmed as a Class 1 

laser product in IEC60825-1:2014 and 

EN60825-1:2014.

The label shown below is attached to the 

inside of the covers.

CAUTION

• 

Keep toner and other consumables out 

of the reach of small children. If these 

items are ingested, consult a physician 

immediately.

• 

Do not dismantle the toner cartridge, 

as doing so may cause toner to fly out 

and enter your eyes or mouth.

If toner gets into your eyes or mouth, 

wash them immediately with cold 

water and immediately consult a 

physician. 

• 

If toner escapes from the toner 

cartridge, make sure not to ingest the 

toner or allow it to directly touch your 

skin. If toner touches your skin, wash 

it away with soap and water. If your 

skin still feels irritated after washing it, 

or you ingest toner, consult a doctor 

immediately.

Telephone Equipment

WARNING

When using telephone equipment 

incorporated into this machine, basic 

safety precautions should always be 

followed to reduce the risk of fire,  

electrical shock, or injury to persons, 

including the following:

1.  Do not use this machine where there 

is a potential for contact with water or 

other liquid.

2.  Do not use the telephone equipment 

during an electrical storm, as there 

may be a remote risk of electrical shock 

from lightning.

3.  Do not use the telephone equipment 

to report a gas leak in the vicinity of the 

leak.

Other Warnings

WARNING

If you are using a cardiac pacemaker

This machine generates a low level 

magnetic flux and ultrasonic waves. If 

you use a cardiac pacemaker and feel 

abnormalities, please move away from 

this machine and consult your physician 

immediately.

Legal Notices

 

Product Name

Safety regulations require the product's 

name to be registered. In some regions 

where this product is sold, the following 

name(s) in parenthesis may be registered 

instead.

• 

imageRUNNER ADVANCE 

8505i/8595i/8585i (F155600)

 

FCC (Federal Communications 

Commission) Users in the 

U.S.A

Laser Beam Printer, Model F155600

Contains Transmitter Module FCC ID: 

AZDFM1M944

CAUTION

• 

The fixing unit and its surroundings 

inside the machine may become hot 

during use. When removing jammed 

paper or when inspecting the inside of 

the machine, do not touch the fixing 

unit and its surroundings, as doing so 

may result in burns or electrical shock.

• 

When removing jammed paper or 

when inspecting the inside of the 

machine, do not expose yourself to 

the heat emitted from the fixing unit 

and its surroundings for a prolonged 

period of time. Doing so may result in 

low temperature burns, even though 

you did not touch the fixing unit and 

its surroundings directly.

• 

There are high-temperature and 

high-voltage components inside the 

machine. Touching them may result in 

personal injury or burns. Do not touch 

the internal parts of the machine which 

are not instructed to in the manuals for 

the machine.

Consumables

WARNING

• 

Do not burn or throw used toner 

cartridges into open flames, as this may 

cause the toner remaining inside the 

cartridges to ignite, resulting in burns 

or a fire.

• 

Do not store toner cartridges or copy 

paper in places exposed to open 

flames, as this may cause the toner or 

paper to ignite, resulting in burns or a 

fire.

• 

If you accidentally spill or scatter toner, 

carefully wipe up the loose toner with 

a damp, soft cloth and avoid inhaling 

any toner dust. Do not use a vacuum 

cleaner that is not equipped with safety 

measures to prevent dust explosions 

to clean up loose toner. Doing so may 

cause damage to the vacuum cleaner 

or result in a dust explosion due to 

static discharge.

• 

For cardiac pacemaker users:

  This drum unit emits low level 

magnetic flux. If you use a cardiac 

pacemaker and feel abnormalities, 

please move away from the drum unit, 

and consult a physician.

Содержание imageRUNNER ADVANCE 8505i

















































Отзывы: