Canon imagerunner advance 8205 Скачать руководство пользователя страница 145

Страница: 145 / 264

145

oubleshooting

Remove any jammed paper from the lower right cover of the main unit.

1.  Open the lower right cover.
2.  Remove any jammed paper.
3.  Close the lower right cover.

When closing the cover, be careful not to get your fi ngers caught, as this may result in personal
injury.

When the Paper Deck Unit-C1/POD Deck Lite-A1 is attached, reconnect the Paper Deck Unit-C1/POD Deck
Lite-A1 to the main unit.

Follow the instructions on the touch panel display.

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper
jam is cleared.

Fixing Transport Unit

Open the front cover of the main unit.

Содержание imagerunner advance 8205









































































































































































































































































Результаты поиска

Содержание imagerunner advance 8205

Отзывы:

Canon imagerunner advance 8205, Руководство по эксплуатации, Страница: 145 / 264

Результаты поиска

Содержание imagerunner advance 8205

Отзывы: