Canon imageRUNNER ADVANCE 8105, Начало работы, Страница: 60 / 256

Operations Required to Use the Machine
1-22
1
Before You Start Using This Machine
Logging In to the Machine as an Administrator
To specify the settings, you must log in to the machine as an administrator.
The operations available on the Settings/Registration screen vary between administrator and general user.
For Administrator:
The Administrator can specify all of the system settings of the machine. As a default, system manager settings (System Manager ID/System
Password) are set on the machine. Thus, the Administrator must log in by entering the System Manager ID and the System Password. The
default setting for both the System Manager ID and System Password is '7654321'. We recommend that you change both the System Manager
ID and System Password. (See e-Manual > Settings/Registration.) For information on the settings that can only be set by the Administrator,
see e-Manual > Security.
For General Users:
Some operations may be restricted.
This section describes the procedures assuming that the machine is in default setting. If the Department ID Management or authentication for
SSO-H is set, enter the necessary items for each log in.
Logging In from the Touch Panel Display
Press (Settings/Registration) on the control panel → log in as an administrator using the touch panel display.
1
Press (Settings/Registration) .
2
Press [Log In] .
-
-