Canon imageRUNNER ADVANCE 6255i, Руководство пользователя

Страница: 16 / 394

14 Preface 1
IMPORTANT
Leave suffi cient space around the power plug so that it
can be unplugged easily. If objects are placed around
the power plug, you will be unable to unplug it in an
emergency.
Handling
•
Do not attempt to disassemble or modify the
machine. There are high-temperature and high-
voltage components inside the machine which may
result in a fi re or electrical shock.
•
If the machine makes strange noises, or gives off
smoke, heat, or strange smells, immediately turn
OFF the main power switch, and disconnect the
power cord from the power outlet. Then, contact
your local authorized Canon dealer. Continued use
of the machine in this condition may result in a fi re
or electrical shock.
•
Do not use highly fl ammable sprays near the
machine. If gas from these sprays comes into
contact with the electrical components inside the
machine, it may result in a fi re or electrical shock.
•
To avoid damage to the power cord and creating a
fi re hazard, always turn OFF the main power switch,
and unplug the interface cable when moving the
machine. Otherwise, the power cord or interface
cable may be damaged, resulting in a fi re or
electrical shock.
•
Make sure that the power plug is fi rmly inserted
into the power outlet if the machine was moved. Do
not use the machine while the connection is loose,
as doing so may cause a fi re.
•
Do not drop paper clips, staples, or other metal
objects inside the machine. Also, do not spill water,
liquids, or fl ammable substances (alcohol, benzene,
paint thinner, etc.) inside the machine. If these items
come into contact with a high-voltage area inside
the machine, it may result in a fi re or electrical
shock. If these items are dropped or spilled inside
the machine, immediately turn OFF the main power
switch, and disconnect the power cord from the
power outlet. Then, contact your local authorized
Canon dealer.
•
Do not use this product for uses other than as a
colour digital multitasking machine.
•
Do not place heavy objects on the machine, as they
may tip over or fall resulting in personal injury.
•
Close the feeder gently to avoid catching your
hands, as this may result in personal injury.
•
Do not press down hard on the feeder when using
the platen glass to make copies of thick books.
Doing so may damage the platen glass and result in
personal injury.
•
Do not touch the fi nisher while the machine is
printing, as this may result in personal injury.
•
Paper that has just been output from the machine
may be hot. Be careful when removing or aligning
paper from the output tray. Touching paper right
after it is output may result in low-temperature
burns.
•
Do not place your hands, hair, clothing, etc., near
the exit and feed rollers. Even if the machine is not
in operation, your hands, hair, or clothing may get
caught in the rollers, which may result in personal
injury or damage if the machine suddenly starts
printing.
•
The base part of the Shift Tray-E1 moves to align
prints during outputting. Do not place your hands
in the base part, as this may result in personal
injury.
Shift Tray-E1
•
Do not place your hands in the part of the tray
where stapling is performed (near the rollers) when
a fi nisher is attached, as this may result in personal
injury.
Staple Finisher-P1/Booklet Finisher-P1