Canon imageRUNNER 6020 Series, Справочное руководство справочное руководство, Страница: 88 / 524

Placing Originals
1-56
1
Bef
ore
Y
ou Star
t Using
This Machine
Orientation of Originals
You can place originals either vertically or horizontally. Always align the top edge of
your original with the back edge of the platen glass (by the arrow in the top left
corner), or with the back edge of the feeder.
NOTE
•
If the top edge of the original is not aligned with the back edge of the platen glass (by the
arrow in the top left corner), your original may not be scanned correctly, depending on the
mode you have set.
•
LTR and STMT originals can be placed either vertically or horizontally. However, the
scanning speed for horizontally placed originals is somewhat slower than for vertically
placed originals. You can place originals horizontally when printing with a Preset Zoom
mode, such as when enlarging an LTR original onto
11" x 17" paper.
•
Horizontally placed LTR and STMT originals are referred to as LTRR and STMTR.
•
11" x 17" and LGL originals must be placed horizontally.
Platen Glass
Feeder
Horizontal Placement Vertical Placement
Horizontal Placement Vertical Placement
ABC
ABC
Place the original
face up.
Place the original
face up.
Place the original
face down.
Place the original
face down.