manualshive.com logo in svg

Canon imageRUNNER 6020 Series, Справочное руководство справочное руководство, Страница: 73 / 524

Поделиться
Скачать
Canon imageRUNNER 6020 Series Скачать руководство пользователя страница 73

Using the Touch Panel Display

1-41

Bef

ore 

Y

ou Star

t Using 

This Machine

1

Touch Panel Key Display

When you press a key on the touch panel display, that key is highlighted, and the 
corresponding mode (function) is set. When you set certain modes, the characters 
on some keys may become grayed out. You cannot press keys that are grayed out. 
This means that you cannot set these modes in combination with the presently set 
mode.

■

Mode Setting Keys

■

Keys That Change to On/Off When Pressed

Keys that have a right triangle (

) indicate that those keys have additional screens to set 

their functions. If you press a key that does not have a right triangle (

), it turns that mode 

On or Off.

Keys that have a colored triangle (

) in the lower right corner and that appear on screens 

for storing settings, are keys that already have settings stored in them.

State of Keys

Description

Key is not selected. It is available for selection.

Key is highlighted.

Key is selected. It is available for selection.

The text is grayed out.

Indicates a mode that cannot be set in 
combination with a previously selected mode.

Mode Is Turned Off

Mode Is Turned On

(Checked)

(Highlighted)

Keys That Display Additional Settings

Keys That Turn Modes On or Off

Settings Are Stored

No Settings Are Stored

Содержание imageRUNNER 6020 Series













































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов