Canon imageRUNNER 6020 Series Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 524

Canon imageRUNNER 6020 Series Скачать руководство пользователя страница 45

What This Machine Can Do

1-13

Bef

ore

Y

ou Star

t Using

This Machine

1

NOTE

•

Settings made from the Additional Functions screen are not changed even if you
press

(Reset).

•

For instructions on how to customize settings, see Chapter 3, “Customizing Settings.”

•

For instructions on how to specify the System Settings, see Chapter 4, “System Manager
Settings.”

•

[Communications Settings], [Address Book Settings], [Forwarding Settings], and
[Manage/Access to Address Book] are not displayed on the imageRUNNER 6020/5020.

•

[Printer Settings] is displayed only if the Network Multi-PDL Printer Kit is attached.

•

[Network Settings], [Remote UI], and [Clear Message Board] are displayed only if the
Network Kit is attached.

•

[Report Settings] is displayed only if the Network Kit or Network Multi-PDL Printer Kit is
attached.

•

For instructions on how to specify the Printer Settings, see the

PS/PCL Printer Guide

.

•

For instructions on how to specify the Network Settings, see the

Network Guide

.

•

[Auto Online/Offline] is only displayed if the Network Scan Function is attached.

Functions That Conserve Power

You can conserve power efficiently using the following modes when the machine is
not being used.

NOTE

•

After the machine wakes up from being in one of these modes, there will be a slight delay
in starting to use the machine.

•

The touch panel display turns OFF when the machine enters one of these modes.

•

You can continue to print data sent from a computer when the machine enters one of
these modes.

■

Energy Saver Mode

When the machine will not be used for a prolonged period of time, press

(Energy

Saver) to put the machine into the Energy Saver mode. This reduces the temperature of
the machine’s fixing unit, and thereby conserves energy. To start operations again,
press

(Energy Saver) once more. Pressing the control panel power switch also

reactivates the machine.

NOTE

The following Energy Saver mode settings can be selected: ‘–10%’, ‘–25%’, ‘–50%’, and
‘None’. (See “Changing the Energy Saver Mode Setting,” on p. 3-19.)

«
...
43
44
45
46
47
...
»

Содержание imageRUNNER 6020 Series













































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов