Canon imageRUNNER 6020 Series Скачать руководство пользователя страница 321 | Manualshive

Страница: 321 / 524

Canon imageRUNNER 6020 Series Скачать руководство пользователя страница 321

LDAP Server Settings

4-97

4

System Manager Settings

LDAP Server Settings

If the information for an LDAP (Lightweight Directory Access Protocol) server is
registered in the machine, you can search for e-mail addresses through the LDAP
server. E-mail addresses obtained through the server can be specified as
destinations or stored in the Address Book.

NOTE

•

The following types of LDAP servers can be used with this machine:
- Windows 2000 Server with Active Directory
- Novell NetWare 5.1 (NDS) or later
- Lotus Notes Domino R5 or later

For more information, contact your local authorized Canon dealer.

•

You can register up to five LDAP servers.

Registering an LDAP Server

You have to specify the relevant information for the LDAP server, such as the server
name and address.

1

Press

(Additional Functions)

➞

[System Settings].

If the System Manager ID and Password have already been set, enter the System
Manager ID and System Password using

-

(numeric keys)

➞

press

(ID).

2

Press [

▼

] or [

▲

] until [Store LDAP Server] appears

➞

press

[Store LDAP Server].

0

9

ID

«
...
319
320
321
322
323
...
»

Содержание imageRUNNER 6020 Series













































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов