Canon imageRUNNER 6020 Series Скачать руководство пользователя страница 239

Страница: 239 / 524

Setting Department ID Management (Dept. ID Management)

4-15

System Manager Settings

Changing the Password and Impression Limit

The following instructions describe how to change the password and impression
limit settings of the stored Department ID.

Press

(Additional Functions)

➞

[System Settings]

➞

[Dept.

ID Management].

If the System Manager ID and Password have already been set, enter the System
Manager ID and System Password using

(numeric keys)

➞

press

(ID).

NOTE

If the desired setting is not displayed, press [

▼

] or [

▲

] to scroll to the desired

setting.

Press [On]

➞

[Store Dept. ID/Password].

Содержание imageRUNNER 6020 Series













































































































































































































































































































































































































































































































































Результаты поиска

Содержание imageRUNNER 6020 Series

Отзывы:

Canon imageRUNNER 6020 Series, Справочное руководство справочное руководство, Страница: 239 / 524

Результаты поиска

Содержание imageRUNNER 6020 Series

Отзывы: