Canon imageRUNNER 5075, Руководство пользователя

Страница: 126 / 250

PDF1.5 Settings
3-58
3
Pr
inter Settings Menu
PDF1.5 Settings
Settings on this menu specify how to print PDF files that are sent directly to the
machine using the Remote UI or command prompt.
NOTE
š These settings are applicable only when printing in the PDF 1.5 mode of Direct Print.
š
For details on the Direct Print functions, see Chapter 5, "How to Use the Direct Print
Function."
Enlarge/Reduce to Fit Size
On, Off
*
This setting enlarges or reduces the original document to match the printable area
of the paper size.
If [On] is selected, the document is reduced to a page size that fits the paper size
if the page size specified in the PDF file is larger than the printable area of the
paper size. Conversely, the original document is enlarged to a page size that fills
the paper size if the page size specified in the PDF file is smaller than the
printable area of the paper size.
NOTE
š If you specify [Auto] in 'Paper Size' using the Remote UI, this setting is not applied.
š
The PDF file page size is enlarged or reduced with the same ratio for both the
length and width.
Enlarge Print Area
On, Off
*
This setting specifies whether to enlarge the printable area to the edge of the
paper.
If [On] is selected, the printable area is enlarged to 0 mm from the top, bottom,
left, and right edges of the paper. If the PDF file page aspect ratio is the same as
the specified paper size, you can print without inserting any blank spaces on the
edge of the paper.
If [Off] is selected, the printable area is reduced to 4 mm from the top, bottom, left,
and right edges of the paper.