Canon imageRUNNER 5070, Справочное руководство, Страница: 223 / 600

Specifying Common Settings 4-55
4
Cust
om
iz
in
g
Set
ti
ng
s -
C
o
m
m
on
Set
ti
ng
s
<Receive/Fax> appears only if the optional Universal Send Kit is activated, and
the optional Super G3 FAX Board is installed. <Receive> appears only if the
optional Universal Send Kit is activated, and the optional Super G3 FAX Board is
not installed. <Fax> appears only if the optional Super G3 FAX Board is installed,
and the optional Universal Send Kit is not activated.
<Other> is used for specifying report printing settings.
Print from a remote copy machine are included in <Copy>.
PDL prints from MEAP applications are included in <Printer>. However, local
print jobs from MEAP applications are included in <Mail Box>.
The selected mode is set.
NOTE
If the same printing priority has been specified for multiple functions, printing starts
with the first processed print job.
4
Press [Done] repeatedly until the Basic Features screen
appears.
Image Form
You can store image forms and superimpose them on the output using the Form
Composition mode in the Copy and Mail Box functions. For instructions on using
the Form Composition mode, see Chapter 6, "Special Copying Features - Image
Editing," in the
Copying Guide , or Chapter 5, "Printing Documents in an Inbox," in
the Mail Box Guide .
IMPORTANT
•
Up to 100 image forms can be stored. However, this number varies depending on the
capacity of the hard disk.
•
Be sure to place the original that contains the image form on the platen glass. It is not
possible to scan an image form from the feeder.
NOTE
Image forms scanned in the Entire Image Composition mode can also be retrieved from
a personal computer and stored in the machine.