Canon imageRUNNER 5055 series, Руководство по обслуживанию

Страница: 387 / 596

Chapter 11
11-39
F-11-68
11.1.27 Option for exclusive individual measure
0016-1428
iR5065 / iR 5055 / iR5075 / / /
-Display Setting of Copy Tab
Make a setting as to whether to display/hide the copy screen (copy tab) on the control panel. This is the specification for users who want to customize hiding it on
control panel.
Default value
1: display
Setting range, item
0: hide 1: display
Setting Procedure
1) Startup [SERVICE MODE] (After pressing [USER MODE] button of MEAP device, press [2] button and [8] button at the same time on control panel. Then by
pressing [USER MODE] button again, [SERVICE MODE] screen is displayed).
2) Press [COPIER] button.
3) Press [Option] button.
4) Press [BODY] button.
5) Press [<-]or[->] (arrow) button.
6) Press [UI-COPY] button.
7) Press either 0 (hide) or 1 (display) on control panel (the numerical value input in the field is displayed), and press [OK] button.
8) Check to see that it is reflected in setting field, and turn off the main power, and then, turn on the main power.
-Error at starting up the MEAP application/Setting to hide JAM screen (level 2)
In the case that operation is restricted by MEAP application, hide the warning screen of error/JAM (such as JAM screen, door opening, no-toner). In the case that
these errors occur, there will be a display indicating 'call the service personnel' etc.
Memo:
Part of the warning screens is displayed if shifting to the device screen.
- As for the screens for jam and no-toner, the warning screen (animation) can be displayed by pressing the followings: [Device Screen] > [Recovery Procedure]
- As for the screen for door opening, the warning screen cannot be displayed because there is no display for [[Device Screen] > [Recovery Procedure]
Default value
1: No activation of warning display
Setting range, item
0: display warning screen 1: hide warning screen
Setting Procedure
1) Startup [SERVICE MODE] (After pressing [USER MODE] button of MEAP device, press [2] button and [8] button at the same time on control panel. Then by
pressing [USER MODE] button again, [SERVICE MODE] screen is displayed).
2) Startup level 2 of [SERVICE MODE] (After starting up [SERVICE MODE] in step 1, press [USER MODE] button again. Then, by pressing [2] button on control
panel, the screen is displayed.
3) Press [COPIER] button.
4) Press [Option] button.
5) Press [BODY] button.
6) Press [<-]or[->] button.
7) Press [ANIM-SW] button.
8) Press either 0 (display warning screen) or 1 (hide warning screen) on control panel (the numerical value input in the field is displayed), and press [OK] button.
LicenseFile-Version: 1
LicenseFile-Id: f6489a8c-8c7e-4d74-bd12-b031ea6a62a5
Application-Id: e92b0b91-7c42-45b1-96b3-295d5d1b5877
Serial-No: XYZ00123
Validated-Period: 100
MaximumBWScan1: 1000, stop
MaximumBWScan2: 900, stop
MaximumBWScan3: 800, stop
MaximumBWScan4: 700, stop
MaximumPrintedImpressions: 1000, stop
MaximumPrintedImpressions-BW: 800, stop
MaximumPrintedImpressions-BW-Large: 200, stop
MaximumPrintedImpressions-BW-Small: 600, stop
MaximumScannedImpressions: 2000, stop
MaximumScannedImpressions-BW: 1200, stop
IxQvZ/A8O0aDsUBdMeu5XrxqIsqLzq7JAjHAD/ZMnNxVMsR7RGcuI2c6RRdU7mlW
ht2VF8LA3SH6n4kxvZYmEQZ8pBhu67wliysAJ0gHS0l6WsMqX6WI5ZAQeD8TZnnf
344VXYG4
Serial No
Application ID
License File ID
Counter information
Validated Period