Canon imageRUNNER 5055 series, Руководство по обслуживанию, Страница: 250 / 596

Chapter 8
8-34
F-8-93
8.10.17 Manual Feed Tray paper sensor
8.10.17.1 Removing the Manual Feeding Tray Sensor
0015-5016
iR5065 / iR 5055 / iR5075 / / /
1) Open the right door unit (upper) [1], and remove the screw from the door
strap; and then fully open the right door unit (upper).
F-8-94
2) Detach the cover [2].
- 1 screw [1]
F-8-95
3) Remove the sensor unit [2].
- 1 screw [1]
F-8-96
4) Free the harness [1] from the edge saddle [2], and disconnect the
connector [3].
5) Remove the sensor [4].
F-8-97
8.10.18 Registration Roller
8.10.18.1 Before Removing the Registration Roller
0015-5017
iR5065 / iR 5055 / iR5075 / / /
1) Detach the duplexing feed front cover.
(page 10-
12) Reference[Removing the Duplexing Feed Front Cover]
2) Remove the fixing/feeding unit. (page 9-18) Reference[Removing the
Fixing/Feeding unit]
3) Remove the transfer/separation charging assembly.
(page 7-
29) Reference[Removing Transfer/Separation Charging Assembly]
4) Remove the registration clutch.
(page 8-38)
Reference[Removing the
Registration Clutch]
8.10.18.2 Removing the Registration Roller
0015-5020
iR5065 / iR 5055 / iR5075 / / /
1) Detach the protection cover [2].
- 1 screw [1]
F-8-98
2) Remove the followings from the rear side.
- spring [1]
- E-ring [2]
- spacer [3]
- bearing [4]
- stopper [5]
[1]
[2]
hole A
hole B
[1] [2]
[1] [2]
[1] [2]
[1]
[2] [3] [4]
[1]
[2]