Canon imageRUNNER 5055 series, Руководство по обслуживанию, Страница: 249 / 596

Chapter 8
8-33
F-8-88
8.10.15 Manual Feed Roller
8.10.15.1 Before Removing the Manual Feeding Roller
0015-5011
iR5065 / iR 5055 / iR5075 / / /
1) Remove the manual feeding pickup roller unit.
(page 8-
32) Reference[Removing the Manual Feeding Pickup Roller Unit]
8.10.15.2 Removing the Manual Feeding Roller
0015-5012
iR5065 / iR 5055 / iR5075 / / /
1) Remove the feeding roller [2].
- 1 resin E-rings [1]
F-8-89
8.10.16 Manual Separation Roller
8.10.16.1 Before Removing the Manual Separation Roller
0015-5013
iR5065 / iR 5055 / iR5075 / / /
1) Remove the manual feeding pickup roller unit. (page 8-
32) Reference[Removing the Manual Feeding Pickup Roller Unit]
8.10.16.2 Removing the Manual Separation Roller
0015-5014
iR5065 / iR 5055 / iR5075 / / /
1) Remove the separation roller assembly [3].
- 2 resin E-rings [1]
- 2 bushings [2]
F-8-90
2) Push the hook [1] using the driver etc. in the direction of the arrow to
remove the separation roller [2].
F-8-91
8.10.16.3 Adjusting the Pressure of the Manual
Separation Roller
0016-0026
iR5065 / iR 5055 / iR5075 / / /
When picking up, if double feeding or failure occurs, adjust the position of
the pressure spring of the separation roller.
1) Detach the right cover (upper).
2) Remove the upper guide [1].
F-8-92
3) Move the mount [3] to adjust the position of the pressure spring of the
separation roller.
- If double feeding occurs, remove the mounting screw [2], lower the
mounting base [3] and tighten the screw [2] in the A hole.
- If pickup failure occurs, remove the mounting screw [2], raise the
mounting base [3] and tighten the screw [2] in the B hole.
[1]
[3]
[7]
[4]
[5]
[6]
[5]
[4]
[7]
[3]
[7]
[2]
[1]
[6]
Front side
Rear side
[1] [2]
[3]
[1]
[1] [2]
[3]
[1]
[2]
[1]
[1]