Canon ImageRunner 5020 Series Скачать руководство пользователя страница 469 | Manualshive

Страница: 469 / 524

Canon ImageRunner 5020 Series Скачать руководство пользователя страница 469

Card Reader-C1

7-47

Optional Equipment

7

Card Reader-C1

When the Card Reader-C1 (optional) is attached to the main unit, you must insert
the control card before operating this machine. The Card Reader-C1 controls
Department ID Management automatically.

IMPORTANT

•

If you use a login service other than Default Authentication, Limit Functions setting is not
available.

•

If SSO is set as a login service, you cannot use the Card Reader-C1 (optional).

•

If SDL is set as a login service, enter your card number in the card ID field. See the

MEAP SMS Administrator Guide

for details.

NOTE

•

If the Basic Features screen does not appear on the touch panel display even when the
control card is inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted.

•

Insert the usable control card correctly.

•

For instructions on how to turn the power ON, see “Main Power and Control Panel
Power,” on p. 1-32.

•

When the Card Reader-C1 (optional) is attached, the following two types of cards can be
used:
- The optical card can manage up to 200 departments.
- The magnetic card can manage up to 3,000 departments.

•

The maximum number of departments that can be managed, depends on the machine.
The imageRUNNER 6020i/5020i and imageRUNNER 6020/5020 can manage up to
1,000 departments.

CONTROL CARD

1 2 3

CONTROL CARD III

001

1 2 3

Magnetic Card

Optical Card

«
...
467
468
469
470
471
...
»

Содержание ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов