manualshive.com logo in svg

Canon ImageRunner 5020 Series, Справочное руководство справочное руководство, Страница: 319 / 524

Поделиться
Скачать
Canon ImageRunner 5020 Series Скачать руководство пользователя страница 319

Setting MEAP Settings (MEAP Settings)

4-95

System Manager Settings

4

Printing Installed Applications’ Information (Print System 
Information)

You can print the information of the MEAP applications and certain system 
applications.

NOTE

•

This mode can be used only if the optional Network Multi-PDL Printer Kit is installed.

•

The information is printed as a print job of the printer driver. You can check the details of 
the job by pressing [System Monitor]. (See “Checking Job Details,” on p. 2-8.)

•

The following attributes are set to the jobs when printing.
- Job Name: “MEAP SYSTEM INFORMATION” is always set.
- Job Client: The login name of the user who operates Additional Functions is set. 

However, this is activated only if you enter from MEAP authentication. 

- Client Job ID: ‘0’ is always set to the field of the application ID.
- Document Format: [Supported Document Format] is obtained using CPCA. If PCL 

exists in the Supported Document Format, PCL is set. If PCL does not exist, ESC/P is 
set.

1

Press

(Additional Functions) 

➞

 [System Settings].

If the System Manager ID and Password have already been set, enter the System 
Manager ID and System Password using

-

(numeric keys) 

➞

 press

(ID).

2

Press [

▼

] or [

▲

] until [MEAP Settings] appears 

➞

 press 

[MEAP Settings].

3

Press [Print System Information].

0

9

ID

Содержание ImageRunner 5020 Series













































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов